Asus Pro H610T D4-CSM PRO H610T D4 Users Manual English - Page 14

1.2.2 Rear panel connectors 1 2 3 4 5 6 7 8 1. DC power connector. Insert the power adapter into this port. • Supports 19V DC input. • The power adapter is purchased separately. • Use the appropriate DC power adapter for the following scenarios: - Use a 120W adapter when a 35W CPU is installed on the system. - Use a 120W adapter when using your system with an LVDS panel. - Use a high-rated adapter (above 120W) when a 65W CPU is installed on the system. 2. HDMI® port. This port is for a High-Definition Multimedia Interface (HDMI®) connector, and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected content. 3. DisplayPort. This port is for a DisplayPort-compatible device. 4. USB 2.0 ports. These 4-pin Universal Serial Bus (USB) ports are for USB 2.0 devices. 5. Ethernet port. This port allows Gigabit connection to a Local Area Network (LAN) through a network hub. Refer to the table below for the Ethernet port LED indications. Realtek 1Gb Ethernet port LED indications Activity Link LED Status Description OFF No link ORANGE Linked BLINKING Data activity Speed LED Status Description OFF 10Mbps connection ORANGE 100Mbps connection GREEN 1Gbps connection ACT/LINK LED SPEED LED Ethernet port 6. USB 3.2 Gen 2 ports. These Universal Serial Bus (USB) ports connect to USB 3.2 Gen 2 devices. 7. Microphone port (pink). This port connects a microphone. 8. Line Out port (lime). This port connects a headphone or a speaker. In 4-channel, 5.1-channel, and 7.1-channel configurations, the function of this port becomes Front Speaker Out. 1-6 Chapter 1: Product Introduction