Asus ProArt PA27UCX-K PA27UCX Series User Guide - Page 18

2.4 Connecting the cables 1. Connect the cables as the following instructions: For service only • To connect the power cord: Connect one end of the power cord securely to the monitor's AC input port, the other end to a power outlet. • To connect the HDMI/DisplayPort/USB Type-C* cable: a. Plug one end of the HDMI/DisplayPort/USB Type-C* cable to the monitor's HDMI/DisplayPort/USB Type-C jack. b. Connect the other end of the HDMI/DisplayPort/USB Type-C* cable to your device's HDMI/DisplayPort/USB Type-C jack. It is suggested to use USB cerified Type-C cable. If the signal source supports DP Alt mode, all video, audio and data signal can be transmitted. • To use the earphone: connect the end with plug type to the monitor's earphone jack when an HDMI/DisplayPort/USB Type-C signal is fed. • To use the USB upstream/downstream function: » Upstream: Use an USB Type-C cable and plug on end of the Type-C connector to the monitor's USB 3.1 Type-C port ( ) as upstream and the other end to your computer's USB Type-C jack. Or use an USB Type-C to Type-A cable and plug the Type-C connector to the the monitor's USB 3.1 Type-C port ( ) as upstream and the Type-A connector to your computer's USB Type-A jack. Make sure your computer is installed with the latest Windows 7/Windows 8.1/Windows 10 operating system. That will enable the USB ports on the monitor to work. » Downstream: Use an USB cable to connect your device with the monitor's USB Type A jack. » USB Type-A jack can be used for Color Calibrator. When these cables are connected, you can choose the desired signal from the Input Select item in the OSD menu. 2-4 Chapter 2: Setup