Asus ROG CROSSHAIR X670E GENE ROG CROSSHAIR X670E Series BIOS manual English - Page 52
DF Common Options, Disable DF to external downstream IP Sync Flood Propagation
View all Asus ROG CROSSHAIR X670E GENE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
SNP Memory (RMP Table) Coverage When this item is set to [Enabled], the ENTIE system memory is covered. Configuration options: [Disabled] [Enabled] [Custom] [Auto] The following item appears only when SNP Memory (RMP Table) Coverage is set to [Custom]. Amount of Memory to Cover Specify MB of System Memory to be covered in Hex. Configuration options: [0] - [100000] SMEE Control secure memory enryption enable. Configuration options: [Disable] [Enable] [Auto] Action on BIST Failure Allows you to set the action to take when a CCD BIST failure is detected. Configuration options: [Do nothing] [Down-CCD] [Auto] DF Common Options Memory Addressing Memory interleaving Configuration options: [Disabled] [Auto] Memory interleaving size Controls the memory interleaving size. The valid values are AUTO, 256 bytes, 512 bytes, 1 Kbytes, or 2 Kbytes. This determines the starting address of the interleave (bit 8, 9, 10 or 11). Configuration options: [256 Bytes] [512 Bytes] [1KB] [2KB] [Auto] DRAM map inversion Inverting the map will cause the highest memory channels to get assigned the lowest addresses in the system. Configuration options: [Disable] [Enable] [Auto] Location of private memory regions Controls whether or not the private memory regions (PSP, SMU and CC6) are at the top of DRAM pair or distributed. Note that distributed requires memory on all dies. Note that it will always be at the top of DRAM if some dies don't have memory regardless of this option's setting. Configuration options: [Distributed] [Consolidated] [Consolidated to 1st DRAM pair] [Auto] ACPI ACPI SRAT L3 Cache as NUMA Domain [Disabled] Memory Addressing \ NUMA nodes per socket will be declared. [Enabled] Each CCX in the system will be declared as a separate NUMA domain. [Auto] Sets to the default option. Disable DF to external downstream IP Sync Flood Propagation Disables Error propagation to UMC or any downstream slaves eg. FCH. Use this to avoid reset in failure scenario. Configuration options: [Sync flood disabled] [Sync flood enabled] [Auto] 52 ROG CROSSHAIR X670E Series BIOS Manual