Asus RS320Q-E7 RS12 User Guide - Page 55
Internal connectors, Serial ATA connectors SATA 6Gb/s: 7-pin SATA1, SATA2 [Blue] SATA 3Gb/s
View all Asus RS320Q-E7 RS12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
4.3 Internal connectors 1. Serial ATA connectors (SATA 6Gb/s: 7-pin SATA1, SATA2 [Blue]) (SATA 3Gb/s: 7-pin SATA3, SATA4, SATA5, SATA6 [Black]) Supported by the Intel® C204 chipset, these connectors are for the Serial ATA signal cables for Serial ATA hard disk drives that allows up to 6Gb/s of data transfer rate. If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1, RAID 10, or RAID 5 configuration. The actual data transfer rate depends on the speed of Serial ATA hard disks installed. For details on the Intel® Rapid Storage Technology utility, please refer to Chapter 6 RAID Configuration. 2. USB connector (10-1 pin USB34, USB56; A-Type USB5) These connectors are for USB 2.0 ports. Connect the USB module cables to connectors USB34, then install the modules to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. ASUS RS320Q-E7/RS12 4-7