Asus RS500-E6 EPS4 User Guide - Page 38
Installing ASMB4 series management board (optional), Locate the Baseboard Management
View all Asus RS500-E6 EPS4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
2.8.3 Installing ASMB4 series management board (optional) Follow the steps below to install an optional ASMB4 series management board on your motherboard. 1. Locate the Baseboard Management Controller (BMC) connector on the motherboard. 2. Place the board on the BMC connector of the motherboard, aligning with the pin connectors. 3. Press the board firmly until it is completely seated in place. 4. When installed, the board appears as shown. 5. Insert the LAN cable plug to the LAN port 3 (dedicated LAN) or LAN port 1 (shared LAN) for server management. 2-20 LAN port 3 LAN port 1 Chapter 2: Hardware setup
Chapter 2:
Hardware setup
2-20
4.
When installed, the board appears
as shown.
2.8.3
Installing ASMB4 series management board (optional)
Follow the steps below to install an optional ASMB4 series management board on
your motherboard.
1.
Locate the Baseboard Management
Controller (BMC) connector on the
motherboard.
2.
Place the board on the BMC
connector of the motherboard,
aligning with the pin connectors.
3.
Press the board firmly until it is
completely seated in place.
5.
Insert the LAN cable plug to
the LAN port 3 (dedicated
LAN) or LAN port 1 (shared
LAN) for server management.
LAN port 3
LAN port 1