Asus RS500-E6 EPS4 User Guide - Page 54
CPU and system fan connectors, pin CPU_FAN1/2, REAR_FAN1/2, FRNT_FAN1/2/3/4
View all Asus RS500-E6 EPS4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
7. CPU and system fan connectors (4-pin CPU_FAN1/2, REAR_FAN1/2, FRNT_FAN1/2/3/4) The fan connectors support cooling fans of 350 mA-740 mA (8.88 W max.) or a total of 3.15 A-6.66 A (53.28 W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors! 8. Serial port connector (10-1 pin COM2) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. The serial port module is purchased separately. 4-12 Chapter 4: Motherboard information