Asus RS700-E8-RS4 User Guide - Page 36
expansion card A then remove the, Place the butterfly riser card on a flat
View all Asus RS700-E8-RS4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
3. Place the butterfly riser card on a flat and stable surface. 4. Remove the metal cover then set it aside. metal cover PCIE x8 slot The default metal cover on the PCIE x8 slot of the butterfly riser card is an ASUS proprietary card bracket. It is screwless by design allowing for easy installation or removal. 5. Prepare the PCIE x8 expansion card. If your expansion card is pre-installed with a proprietary card bracket, proceed to step 9. 6. Remove the two screws on the expansion card (A) then remove the card bracket (B). 7. Get the metal cover (proprietary card bracket) that you removed earlier in step 4. 8. Secure the expansion card and the metal cover with two screws. 9. Install the expansion card and the metal cover assembly to the PCIE x8 slot as shown. Ensure that the metal cover is inserted and firmly seated in place. card bracket metal cover 2-18 Chapter 2: Hardware setup