Asus RS700-E8-RS4 User Guide - Page 46

2.8.3 Replacing optical drive (optional) This server system supports a slim-type optical disk drive. To replace the optical disk drive: 1. Remove the screw that secures the optical drive. Set aside. 2. Push the spring lock to the right (A) to remove the SATA/SAS drive tray then pull the tray lever outward (B). The drive tray ejects slightly after you pull out the lever (C). 3. Hold the tray lever and pull the drive tray out of the bay. 4. Pull the optical drive module. spring lock tray lever 5. Carefully insert the replacement optical disk drive module into the drive bay until it is securely seated in place. 6. Carefully insert the drive tray and push it all the way to the depth of the bay until just a small fraction of the tray edge protrudes. 7. Push the tray lever until it clicks, and secures the drive tray in place. The drive tray is correctly placed when its front edge aligns with the bay edge. 8. Secure the optical drive with the screw that you removed in step 1. 2-28 Chapter 2: Hardware setup