Asus RS720Q-E6 RS12 User Guide - Page 31
Hard disk drives, To install a hot-swap SATAII/SAS HDD
View all Asus RS720Q-E6 RS12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
2.4 Hard disk drives The system supports three hot-swap SATAII/SAS hard disk drives per node (available only when an optional ASUS PIKE SAS RAID card is installed) or three hot-swap SATAII hard disk drives per node. The hard disk drive installed on the drive tray connects to the motherboard SATAII/SAS ports via the SATAII/SAS backplane. To install a hot-swap SATAII/SAS HDD spring lock 1. Release a drive tray by pushing the spring lock to the right, then pulling the tray lever outward. The drive tray ejects slightly after you pull out the lever. 2. Firmly hold the tray lever and pull the drive tray out of the bay. 3. Take note of the drive tray holes. Each side has three holes to fit different types of hard disk drives. Use two screws on each side to secure the hard disk drive. 4. Place a SATAII/SAS hard disk drive on the tray, then secure it with four screws. ASUS RS720Q-E6/RS12, RS724Q-E6/RS12 2-11