Asus RS724QA-E6 RS12 User Guide - Page 27
Creating an IM Volume, Adapter Properties Screen, Properties, Create IM, Volume
View all Asus RS724QA-E6 RS12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
3.2.1 Creating an IM Volume Follow these steps to create an IM volume with the SAS BIOS CU: 1. On the Adapter List screen, use the arrow keys to select an LSI SAS adapter. 2. Press Enter to go to the Adapter Properties screen, shown in Figure 3.1. Figure 3.1 Adapter Properties Screen LSI Logic MPT Setup Utility vx.xx.xx.xx Adapter Properties -- SAS1068 Adapter PCI Slot PCI Address(Bus/Dev/Func) MPT Firmware Revision SAS Address Status Boot Order Boot Support SAS1068 03 03:00:00 00.03.23.00-IT 500605B0:0000C580 Enabled 1 [Enabled BIOS & OS] RAID Properties SAS Topology Advanced Adapter Properties Esc = Exit Menu F1/Shift+1 = Help Enter = Select Item -/+ = Change Item 3. On the Adapter Properties screen, use the arrow keys to select RAID Properties on the screen and press Enter. 4. When you are prompted to select a volume type, select Create IM Volume. The Create New Array screen shows a list of disks available to be added to a volume. 5. Move the cursor to the RAID Disk column and select a disk. To add the disk to the volume, change the No to Yes by pressing the + key, − key, or space bar. When the first disk is added, the SAS BIOS CU prompts you to either keep existing data or overwrite existing data. Creating IM and IME Volumes 3-3 Version 1.1 Copyright © 2006, 2007 by LSI Logic Corporation. All rights reserved.