Asus RT-N66U User Manual - Page 51

Restoring/Saving/Uploading settings, User Name, Password, Enable DHCP, IP address, Domain Name - admin

Get Asus RT-N66U PDF manuals and user guides View all Asus RT-N66U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

If the ADSL "LINK" light blinks continuously or stays off, Internet access is not possible - the Router is unable to establish a connection with the ADSL network. • Ensure that all your cables are all properly connected . • Disconnect the power cord from the ADSL or cable modem, wait a few minutes, then reconnect the cord. • If the ADSL light continues to blink or stays OFF, contact your ADSL service provider. Network name or encryption keys are forgotten. • Try setting up the wired connection and configuring the wireless encryption again. • Press the Reset button at the rear panel of the wireless router for more than five seconds. How to restore the system to its default settings? • Press the Reset button at the rear panel of the wireless router for more than five seconds. • Refer to the section Restoring/Saving/Uploading settings in Chapter 3 of this user manual. The following are the factory default settings: User Name: admin Password: admin Enable DHCP: Yes (if WAN cable is plugged in) IP address: 192.168.1.1 Domain Name: (Blank) Subnet Mask: 255.255.255.0 DNS Server 1: 192.168.1.1 DNS Server 2: (Blank) SSID: ASUS 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
51
If the ADSL “LINK” light blinks continuously or stays off,
Internet access is not possible - the Router is unable to
establish a connection with the ADSL network.
•
Ensure that all your cables are all properly connected .
•
Disconnect the power cord from the ADSL or cable modem,
wait a few minutes, then reconnect the cord.
•
If the ADSL light continues to blink or stays OFF, contact your
ADSL service provider.
Network name or encryption keys are forgotten.
•
Try setting up the wired connection and configuring the
wireless encryption again.
•
Press the Reset button at the rear panel of the wireless router
for more than five seconds.
How to restore the system to its default settings?
•
Press the Reset button at the rear panel of the wireless router
for more than five seconds.
•
Refer to the section
Restoring/Saving/Uploading settings
in
Chapter 3 of this user manual.
The following are the factory default settings:
User Name
:
admin
Password
:
admin
Enable DHCP
:
Yes (if WAN cable is plugged in)
IP address
:
192.168.1.1
Domain Name
: (Blank)
Subnet Mask
:
255.255.255.0
DNS Server 1
:
192.168.1.1
DNS Server 2
:
(Blank)
SSID
:
ASUS