Asus SABERTOOTH X99 User Guide - Page 44
Internal connectors, Intel, X99 Serial ATA 6.0 Gb/s connectors 7-pin SATA6G_1-2 [beige]
View all Asus SABERTOOTH X99 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
1.2.9 Internal connectors 1. Intel® X99 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1-2 [beige]; SATA6G_3-6 [gray]; SATA Express [gray at the top]); SATA6G_7-10 [black] These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables. If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® X99 chipset. Chapter 1 • These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode]. Refer to section 3.6.3 SATA Configuration for details. • Before creating a RAID set, refer to section 5.1 RAID configurations or the manual bundled in the motherboard support DVD. 1-28 Chapter 1: Product introduction