Home » Asus Manuals » Motherboards » Asus SABERTOOTH X99 » Manual Viewer

Asus SABERTOOTH X99 User Guide - Page 54

Chassis intrusion connector 4-1 pin CHASSIS, Serial port connector 10-1 pin COM, By default - reset bios

View all Asus SABERTOOTH X99 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

14. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pin labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps and enable the related options in BIOS if you intend to use the chassis intrusion detection feature. A message appears when you connect the sensor or switch at the first time or when you reconnect the sensor or switch to this connector. Reset the system to exit the message. 15. Serial port connector (10-1 pin COM) These connectors are for the serial (COM) port. Connect the serial port module cable to one of these connectors, then install the module to a slot opening at the back of the system shassisS/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis. Chapter 1 The S/PDIF module is purchased separately. 1-38 Chapter 1: Product introduction

Section	Page
Safety information	6
About this guide	7
SABERTOOTH X99 specifications summary	9
Package contents	14
Installation tools and components	15
Chapter 1: Product Introduction	17
1.1 Special features	17
1.1.1 Product highlights	17
1.1.2 “Ultimate COOL” Thermal Solutions	18
1.1.3 “TUF Engine” Power Design	19
1.1.4 “Safe & Stable!” Guardian Angel	19
1.1.5 ASUS EZ DIY	20
1.1.6 ASUS Exclusive Features	21
1.1.7 Other special features	22
1.2 Motherboard overview	23
1.2.1 Before you proceed	23
1.2.2 Motherboard layout	24
1.2.3 Central Processing Unit (CPU)	26
1.2.4 System memory	27
1.2.5 Expansion slots	38
1.2.6 Onboard buttons	40
1.2.7 Jumpers	41
1.2.8 Onboard LEDs	43
1.2.9 Internal connectors	44
Chapter 2: Basic installation	55
2.1 Building your PC system	55
2.1.1 Motherboard installation	55
2.1.2 CPU installation	57
2.1.3 CPU heatsink and fan assembly installation	58
2.1.4 DIMM installation	60
2.1.5 ATX Power connection	61
2.1.6 SATA device connection	62
2.1.7 Front I/O Connector	63
2.1.8 Expansion Card installation	64
2.2 BIOS update utility	65
2.3 Motherboard rear and audio connections	66
2.3.1 Rear I/O connection	66
2.3.2 Audio I/O connections	68
2.4 Starting up for the first time	70
2.5 Turning off the computer	70
Chapter 3: BIOS setup	71
3.1 Knowing BIOS	71
3.2 BIOS setup program	72
3.2.1 EZ Mode	73
3.2.2 Advanced Mode	74
3.2.3 Q-Fan Control	77
3.2.4 EZ Tuning Wizard	79
3.3 My Favorites	81
3.4 Main menu	83
3.5 Ai Tweaker menu	85
3.6 Advanced menu	104
3.6.1 CPU Configuration	105
3.6.2 PCH Configuration	108
3.6.3 PCH Storage Configuration	109
3.6.4 System Agent Configuration	111
3.6.5 USB Configuration	113
3.6.6 Platform Misc Configuration	115
3.6.7 Onboard Devices Configuration	116
3.6.8 APM Configuration	119
3.6.9 Network Stack Configuration	120
3.6.10 NVMe Configuration	120
3.7 Monitor menu	121
3.8 Boot menu	126
3.9 Tool menu	132
3.9.1 ASUS EZ Flash 2 Utility	132
3.9.2 ASUS O.C. Profile	133
3.9.3 ASUS DRAM SPD Information	134
3.10 Exit menu	135
3.11 Updating BIOS	136
3.11.1 EZ Update	136
3.11.2 ASUS EZ Flash 2	137
3.11.3 ASUS CrashFree BIOS 3	138
Chapter 4: Software support	143
4.1 Installing an operating system	143
4.2 Support DVD information	143
4.2.1 Running the support DVD	143
4.2.2 Obtaining the software manuals	145
4.3 Software information	146
4.4 AI Suite 3	146
4.4.1 Ai Charger+	152
4.4.2 EZ Update	153
4.4.3 USB BIOS Flashback	155
4.4.4 Push Notice	157
4.4.5 USB 3.1 Boost	160
4.4.6 System Information	161
4.4.7 USB Charger+	163
4.4.8 Version	164
4.5 Turbo LAN	165
4.6 TUF Detective	166
4.6.1 Post	166
4.6.2 Control	167
4.6.3 Monitor	168
4.6.4 Information	169
4.7 Audio configurations	170
Chapter 5: RAID support	173
5.1 RAID configurations	173
5.1.1 RAID definitions	173
5.1.2 Installing Serial ATA hard disks	174
5.1.3 Setting the RAID item in BIOS	174
5.1.4 Intel® Rapid Storage Technology Option ROM utility	175
5.2 Installing the RAID driver during Windows® OS installation	179
Appendices	181
Notices	181

Match case Limit results 1 per page

1-38

Chapter 1: Product introduction

Chapter 1

14.

Chassis intrusion connector (4-1 pin CHASSIS)

This connector is for a chassis-mounted intrusion detection sensor or switch. Connect

one end of the chassis intrusion sensor or switch cable to this connector. The chassis

intrusion sensor or switch sends a high-level signal to this connector when a chassis

component is removed or replaced. The signal is then generated as a chassis intrusion

event.

By default, the pin labeled “Chassis Signal” and “Ground” are shorted with a jumper

cap. Remove the jumper caps and enable the related options in BIOS if you intend to

use the chassis intrusion detection feature.

A message appears when you connect the sensor or switch at the ﬁrst time or when you

reconnect the sensor or switch to this connector. Reset the system to exit the message.

15.

Serial port connector (10-1 pin COM)

These connectors are for the serial (COM) port. Connect the serial port module cable

to one of these connectors, then install the module to a slot opening at the back of the

system shassisS/PDIF Out module cable to this connector, then install the module to a

slot opening at the back of the system chassis.

The S/PDIF module is purchased separately.