Asus TS100-E8-PI4 User Guide - Page 46
Intel, C222 SATA port S/W RAID setting 3-pin RAID_SEL1
View all Asus TS100-E8-PI4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
4. Intel® C222 SATA port S/W RAID setting (3-pin RAID_SEL1) This jumper allows you to select the Serial ATA RAID configuration utility to use when you create disk arrays. Place the jumper caps on pins 1-2 if you want to use the LSI Logic Embedded SATA RAID Setup Utility (default); otherwise, place the jumper caps on pins 2-3 to use the Intel® Rapid Storage Techonology (IRST). 5. ME firmware force recovery setting (3-pin ME_RCVR1) This jumper allows you to force Intel Management Engine (ME) boot from recovery mode when ME become corrupted. 3-6 Chapter 3: Motherboard information
Chapter 3: Motherboard information
3-6
5.
ME firmware force recovery setting (3-pin ME_RCVR1)
This jumper allows you to force Intel Management Engine (ME) boot from recovery
mode when ME become corrupted.
4.
Intel
®
C222 SATA port S/W RAID setting (3-pin RAID_SEL1)
This jumper allows you to select the Serial ATA RAID configuration utility to use when you
create disk arrays. Place the jumper caps on pins 1
2 if you want to use the LSI Logic
Embedded SATA RAID Setup Utility (default); otherwise, place the jumper caps on pins
2
3 to use the Intel
®
Rapid Storage Techonology (IRST).