Asus TS500-E4 PA4 TS500-E4 - Page 140
LSI Logic Embedded SATA RAID Setup
View all Asus TS500-E4 PA4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
6.2 L SI Logic Embedded SATA RAID Setup Utility (Only for PA4 Model) The LSI Logic Embedded SATA RAID Setup Utility allows you to create RAID 0, RAID 1, or RAID 10 set(s) from SATA hard disk drives connected to the SATA connectors supported by the motherboard Southbridge chip. To enter the LSI Logic Embedded SATA RAID Setup Utility: 1. Turn on the system after installing all the SATA hard disk drives. 2. During POST, the LSI Logic Embedded SATA RAID Setup Utility automatically detects the installed SATA hard disk drives and displays any existing RAID set(s). Press + to enter the utility. The LSI Logic Embedded SATA RAID auto configures to RAID 1 when the SATA to RAID Mode is enabled. 3. The utility main window appears. Use the arrow keys to select an option from the Management Menu, then press . Refer to the Management Menu descriptions on the next page. At the bottom of the screen is the legend box. The keys on the legend box allow you to navigate through the setup menu options or execute commands. The keys on the legend box vary according to the menu level. 6- Chapter 6: RAID configuration