Asus TS500-E4 PA4 TS500-E4 - Page 31
Repeat steps 1 to 3 to install the other heatsink if you have installed
View all Asus TS500-E4 PA4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
2. Use a Phillips screwdriver to tighten the four heatsink screws in a diagonal sequence. 3. Connect the fan cable to the 4‑pin connector labeled CPU_FAN1. Do not forget to connect the CPU fan cable! Hardware monitoring errors may occur if you fail to plug this connector. CPU_FAN1 connector 4. Repeat steps 1 to 3 to install the other heatsink if you have installed a second CPU, then connect the fan cable to the 4‑pin connector labeled CPU_FAN2. ASUS TS500-E4 2-
2-9
ASUS TS500-E4
Do not forget to connect
the CPU fan cable! Hardware
monitoring errors may occur if
you fail to plug this connector.
2. Use a Phillips screwdriver to
tighten the four heatsink screws
in a diagonal sequence.
3. Connect the fan cable to the 4-pin
connector labeled CPU_FAN1.
4. Repeat steps 1 to 3 to install the other heatsink if you have installed a
second CPU, then connect the fan cable to the 4-pin connector labeled
CPU_FAN2.
CPU_FAN1
connector