Asus TS500-E4 PA4 TS500-E4 - Page 66
Insert the I/O board
View all Asus TS500-E4 PA4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
To reinstall the front I/O board: 1. Place the I/O board in the bracket, component side up. Secure the front I/O board to the bracket with a screw. 2. Position the I/O board into the bay with the component side to the left (close to the HDDs). Connect the I/O cables to the connectors on the back of the I/O board. 3. Insert the I/O board into the bay until the bracket fits the front edge of the bay. 4. Secure the I/O board bracket with a screw. USB 2.0 connector 2-44 Chapter 2: Hardware setup
Chapter 2:
Hardware setup
2-44
To reinstall the front I/O board:
1. Place the I/O board in the bracket,
component side up. Secure the
front I/O board to the bracket
with a screw.
2. Position the I/O board into the bay
with the component side to the
left (close to the HDDs). Connect
the I/O cables to the connectors
on the back of the I/O board.
3. Insert the I/O board
into the bay
until the
bracket fits the front
edge of the bay.
4. Secure the I/O board bracket with
a screw.
USB 2.0 connector