Asus TUF X299 MARK 1 TUF X299 MARK 1 Users ManualEnglish - Page 30
Internal connectors, Intel, Serial ATA 6 Gb/s connectors 7-pin SATA6G_12; SATA 6G_34
View all Asus TUF X299 MARK 1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Chapter 1 1.1.9 Internal connectors 1. Intel® Serial ATA 6 Gb/s connectors (7-pin SATA6G_12; SATA 6G_34; SATA 6G_56; SATA 6G_78) These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables. If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® X299 chipset. These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [Intel RST Premium With Intel Optane System Acceleration (RAID)]. 1-14 Chapter 1: Product Introduction
1-14
Chapter 1: Product Introduction
Chapter 1
1.1.9
Internal connectors
1.
Intel
®
Serial ATA 6 Gb/s connectors (7-pin SATA6G_12; SATA 6G_34;
SATA 6G_56; SATA 6G_78)
These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s
signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel
®
Rapid Storage Technology through the onboard Intel
®
X299 chipset.
These connectors are set to
[AHCI Mode]
by default. If you intend to create a Serial ATA
RAID set using these connectors, set the SATA Mode item in the BIOS to
[Intel RST
Premium With Intel Optane System Acceleration (RAID)]
.