Asus TUF X299 MARK 1 TUF X299 MARK 1 Users ManualEnglish - Page 39
RGB header 4-pin RGB_HEADER, This connector is for RGB LED strips.
View all Asus TUF X299 MARK 1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
13. RGB header (4-pin RGB_HEADER) This connector is for RGB LED strips. Chapter 1 The RGB header supports 5050 RGB multi-color LED strips (12V/G/R/B), with a maximum power rating of 2A (12V), and no longer than 2 m. Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. • Actual lighting and color will vary with LED strip. • If your LED strip does not light up, check if the RGB LED extension cable and the RGB LED strip is connected in the correct orientation, and the 12V connector is aligned with the 12V header on the motherboard. • The LED strip will only light up under the operating system. • The LED strip is purchased separately. ASUS TUF X299 MARK 1 1-23