Asus TUF X299 MARK 2 TUF X299 MARK 2 Users ManualEnglish - Page 29
Internal connectors, Intel, Serial ATA 6 Gb/s connectors 7-pin SATA6G_12; SATA 6G_34, SATA 6G_56
View all Asus TUF X299 MARK 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Chapter 1 1.1.9 Internal connectors 1. Intel® Serial ATA 6 Gb/s connectors (7-pin SATA6G_12; SATA 6G_34; SATA 6G_56) These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables. If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® X299 chipset. These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [Intel RST Premium With Intel Optane System Acceleration (RAID)]. ASUS TUF X299 MARK 2 1-13
ASUS TUF X299 MARK 2
1-13
Chapter 1
1.1.9
Internal connectors
1.
Intel
®
Serial ATA 6 Gb/s connectors (7-pin SATA6G_12; SATA 6G_34;
SATA 6G_56)
These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s
signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel
®
Rapid Storage Technology through the onboard Intel
®
X299 chipset.
These connectors are set to
[AHCI Mode]
by default. If you intend to create a Serial ATA
RAID set using these connectors, set the SATA Mode item in the BIOS to
[Intel RST
Premium With Intel Optane System Acceleration (RAID)]
.