Asus TUF X299 MARK 2 TUF X299 MARK 2 Users ManualEnglish - Page 90

Intel® Virtual Raid on CPU in UEFI BIOS, IntelR Virtual Raid on CPU - cpu compatibility

Get Asus TUF X299 MARK 2 PDF manuals and user guides View all Asus TUF X299 MARK 2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 90 highlights

4.1.4 Intel® Virtual Raid on CPU in UEFI BIOS This feature requires a KEY module to enable CPU RAID functions with Intel® CPU RSTe. • The KEY module is purchased separately. • The HYPER M.2 X16 Card is purchased separately. • Due to CPU behavior, CPU RAID functions with Intel® CPU RSTe only supports Intel® Core™ X-series Processors (6-core or above) and Intel® SSD modules. • Refer to section 1.1.9 Internal connectors for the location of the VROC_HW_KEY connector. Due to hardware design, your motherboard does not support CPU RAID configurations as OS drives. To enter the Intel® Virtual Raid on CPU in UEFI BIOS: 1. Enter the BIOS Setup during POST. 2. Go to the Boot menu > CSM (Compatibility Support Module) > Launch CSM, then set the item to [Disabled]. 3. Go to the Advanced menu > CPU Storage Configuration, then set the PCIE slot(s) that you have installed the Hyper M.2 X16 Card(s) or PCIE X4 SSD Card(s) to Hyper M.2 X16 or PCIE X4 SSD Card correspondingly. 4. Save your changes and exit the BIOS Setup, then enter the BIOS Setup again. 5. Go to the Advanced menu > Intel(R) Virtual Raid on CPU > All Intel VMD Controllers, then press to display the Intel® Virtual Raid on CPU menu. Refer to Chapter 3 for details on entering and navigating through the BIOS Setup. Chapter 4 4-6 Chapter 4: RAID Support

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
4-6
Chapter 4: RAID Support
Chapter 4
4.1.4
Intel
®
Virtual Raid on CPU in UEFI BIOS
This feature requires a KEY module to enable CPU RAID functions with Intel
®
CPU RSTe.
•
The KEY module is purchased separately.
•
The HYPER M.2 X16 Card is purchased separately.
•
Due to CPU behavior, CPU RAID functions with Intel
®
CPU RSTe only supports Intel
®
Core™ X-series Processors (6-core or above) and Intel
®
SSD modules.
•
Refer to section
1.1.9 Internal connectors
for the location of the VROC_HW_KEY
connector.
Due to hardware design, your motherboard does not support CPU RAID configurations as
OS drives.
To enter the Intel
®
Virtual Raid on CPU in UEFI BIOS:
1.
Enter the BIOS Setup during POST.
2.
Go to the
Boot
menu >
CSM (Compatibility Support Module)
>
Launch CSM
, then
set the item to
[Disabled]
.
3.
Go to the
Advanced
menu >
CPU Storage Configuration
, then set the PCIE slot(s)
that you have installed the Hyper M.2 X16 Card(s) or PCIE X4 SSD Card(s) to
Hyper
M.2 X16
or
PCIE X4 SSD Card
correspondingly.
4.
Save your changes and exit the BIOS Setup, then enter the BIOS Setup again.
5.
Go to the
Advanced
menu >
Intel(R) Virtual Raid on CPU
>
All Intel VMD
Controllers
, then press <Enter> to display the Intel
®
Virtual Raid on CPU menu.
Refer to Chapter 3 for details on entering and navigating through the BIOS Setup.