Asus TX97-E User Guide - Page 30

III. INSTALLATION (Connectors) R R III. INSTALLATION 9. ATX Power Supply Connector (20-pin block) This connector connects to a ATX power supply. The plug from the power supply will only insert in one orientation because of the different hole sizes. Find the proper orientation and push down firmly making sure that the pins are aligned. ATX Power Connector 12.0V 5VSB PW-0K GND 5.0V GND 5.0V GND 3.3V 3.3V 5.0V 5.0V -5.0V GND GND GND PS-ON GND -12.0V 3.3V IMPORTANT: Make sure that the ATX power supply can take at least 10mAmp load on the 5Volt standby lead (5VSB). You may experience difficulty in powering on your system without this. 10. AT Power Connector (12-pin block) This connector connects to a standard 5 Volt power supply. To connect the leads from the power supply, ensure first that the power supply is not plugged. Most power supplies provide two plugs (P8 and P9), each containing six wires, two of which are black. Orient the connectors so that the black wires are together. +5V -12V -5V P9 P8 ORG RED YLW BLU BLK BLK BLK BLK WHT RED RED RED PG +12V GND +5V Power Connector on Motherboard AT Power Connector Power Plugs from Power Supply Using a slight angle, align the plastic guide pins on the lead to their receptacles on the connector. Once aligned, press the lead onto the connector until the lead locks into place. 30 ASUS TX97-E User's Manual