Asus TX97-E User Guide - Page 53
Save & Exit Setup, Exit Without Saving
View all Asus TX97-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
IV. BIOS SOFTWARE IMPORTANT: If your hard disk was already formatted on an older previous system, incorrect parameters may be detected. You will need to enter the correct parameters manually or use low-level format if you do not need the data stored on the hard disk. If the parameters listed differ from the ones used when the disk was formatted, the disk will not be readable. If the auto-detected parameters do not match the ones that should be used for your disk, do not accept them. Press to reject the presented settings and enter the correct ones manually from the Standard CMOS Setup screen. Save & Exit Setup Select this option to save into the CMOS memory all modifications you specified during the current session. To save the configuration changes, highlight the "Save & Exit Setup" option on the main screen, type "Y", and then press . IV. BIOS (LDCM) Exit Without Saving Select this option to exit the Setup utility without saving the modifications you specify during the current session. To exit without saving, highlight the "Exit Without Saving" option on the main screen and then press . ASUS TX97-E User's Manual 53