Asus TX97-XV User Manual - Page 28
Installation
![]() |
View all Asus TX97-XV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
III. INSTALLATION 4. Serial Port COM1 Connector (9-pin Male) The two serial ports can be used for pointing devices or other serial devices. See "Onboard Serial Port" in Chipset Features Setup of the BIOS SOFTWARE. III. INSTALLATION (Connectors) Serial Port COM 1 (9-pin Male) 4. Serial Port COM2 Connector (10-pin block) This connector supports the provided serial port ribbon cable with mounting bracket. Connect the ribbon cable to this connector and mount the bracket to the case on an open slot. See "Onboard Serial Port" in Chipset Features Setup. (Pin 10 is removed to prevent inserting in the wrong orientation when using ribbon cables with pin 10 plugged). COM 2 Pin 1 For this connector to be available, you must connect the included Serial cable set from COM2 (using the 25-Pin male) to a free expansion slot opening. TIP: You may also remove the bracket connectors and mount them directly to the case to save expansion slot space. Onboard COM2 Serial Connector 7. Floppy drive connector (34-pin block ) This connector supports the provided floppy drive ribbon cable. After connecting the single end to the board, connect the two plugs on the other end to the floppy drives. (Pin 5 is removed to prevent inserting in the wrong orientation when using ribbon cables with pin 5 plugged). NOTE: Connect the Red stripe to Pin 1 Floppy Drive Connector Pin 1 Floppy Drive Connector 28 ASUS TX97-XV User's Manual
![](/manual_guide/products/asus-tx97xv-user-manual-55aaadf/28.png)