Asus Terminator Tualatin 786 MANUAL TERMINATOR TUALATIN English V1.0 - Page 23
ASUS Terminator Barebone System
View all Asus Terminator Tualatin manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
2.5 Install a Hard Disk Drive 5. Connect a power cable from the power supply to the power connector at the back of the HDD. Use the cable with the white connector labeled HDD. 6. Connect one end of the IDE hard disk ribbon cable to the IDE interface at the back of the HDD, matching the red stripe on the cable with Pin 1 on the IDE Ribbon Cable IDE interface. Red Stripe to Pin 1 Power Cable (HDD) 7. Connect the other end of the IDE ribbon cable to the primary IDE connector (blue connector labeled IDE1) on the motherboard. Primary IDE Connector (IDE1) ASUS Terminator Barebone System 23
ASUS Terminator Barebone System
23
2.5
Install a Hard Disk Drive
6.
Connect one end of the IDE
hard disk ribbon cable to the
IDE interface at the back of the
HDD, matching the red stripe
on the cable with Pin 1 on the
IDE interface.
Red Stripe to Pin 1
IDE Ribbon Cable
7.
Connect the other end of the
IDE ribbon cable to the
primary IDE connector (blue
connector labeled IDE1) on
the motherboard.
Power Cable
(HDD)
Primary IDE Connector
(IDE1)
5.
Connect a power cable from
the power supply
to the power
connector at the back of the
HDD. Use the cable with the
white connector labeled HDD.