Asus VENTO 3600 Vento3600 User''''s Manual for English Edition - Page 25
Installing a SATA hard disk drive
View all Asus VENTO 3600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
2.5.2 Installing a SATA hard disk drive To install a S e r i a l A T A hard disk drive: 1. Follow steps 1 to 5 of the previous section. 2. Connect one end of the 7-pin SATA cable to the SATA connector at the back of the drive then connect the other end to a SATA connector on the motherboard. Refer to the motherboard documentation for the location of the SATA connectors 3. For Serial ATA HDDs with a 4pin power connector: Connect a 4-pin (female) power plug from the power supply unit (PSU) to the 4-pin (male) power connector at the back of the drive. For Serial ATA HDDs without a 4-pin power connector: Use a SATA power cable. Connect a 4-pin plug (female) from the PSU to the 4-pin (male) plug of the SATA power cable. Connect the 15-pin SATA power plug to the power connector at the back of the drive. 15-pin 4-pin (male) Serial ATA power cable ASUS VENTO 3600 2-9