Asus VN279Q VN279 Series User Guide for English Edition - Page 16
Detaching the arm/base (for VESA wall mount), Have the front of the monitor face down on a table.
View all Asus VN279Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
2.3 Detaching the arm/base (for VESA wall mount) The detachable arm/base of this monitor is specially designed for VESA wall mount. To detach the arm/base: 1. Have the front of the monitor face down on a table. 2. Remove the rubbers in the four screw holes. (Figure 1) 3. Remove the base (Figure 2). 4. Pry the rear hinge cover (Figure 3). 5. Use a screwdriver to remove the four screws on the hinge (Figure 4), then remove the hinge. 1 2 Figure 1 Figure 2 Figure 3 Figure 4 • We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. • Hold the stand while removing the screws. • The VESA wall mount kit (100 x 100 mm) is purchased separately. • Use only the UL Listed Wall Mount Bracket with minimum weight/load 22.7kg (Screw size: M4 x 10 mm) 2-2 Chapter 2: Setup