Asus WL-330N3G User Guide - Page 40

Channel, Authentication Method, WPA Encryption, WPA Pre-Shared Key, method is used - support list

Page 40 highlights

Channel The 802.11n/802.11g/802.11b specifications supports up to 14 overlapping channels for radio communication. To minimize interference, configure each ASUS WL-330N3G to be non-overlapping; select Auto from the Channel drop-down list to enable the system to select a clear channel during boot up as your operating channel. Based on your site survey of your network facility, make sure that all the ASUS WL-330N3G sharing the same channel, or channels in close number frequency, are located far from each other as possible. Authentication Method This field enables you to set different authentication methods which determine different encryption schemes. The relationships among Authentication Method, WPA Encryption, WPA Pre-Shared Key, WEP Encryption, Passphrase, and WEP Keys are listed in the following table. If all your clients support WPA, using "WPAPSK" is recommended for better security. Authentication Method Open System Shared key WPA-Personal WPA2-Personal WPA-Auto-Personal WPA/WEP Encryption None WEP (64 bits) WEP (128 bits) WEP (64 bits) WEP (128 bits) TKIP+AES TKIP+AES TKIP/AES/ TKIP+AES WPA Pre-Shared Key Passphrase Not required 1-64 characters 1-64 characters 1-64 characters 1-64 characters 8-63 characters 8-63 characters 8-63 characters WEP Key 1-4 Not required 10 hex 26 hex 10 hex 26 hex Not required Not required Not required WPA Encryption When "WPA-Personal", "WPA2-Personal", or "WPA-Auto-Personal" authentication method is used, TKIP (Temporal Key Integrity Protocol) and AES encryption schemes are applied. WPA Pre-Shared Key Select "TKIP" or "AES" in the WPA Encryption, this field is used as a password to begin the encryption process. 8 to 63 characters are required. WEP Encryption When "Open System", or "Shared Key" authentication methods are selected, traditional WEP encryption is applied. 4-14 Chapter 4: Configuration

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70

4-14
Chapter 4: Configuration
Channel
The 802.11n/802.11g/802.11b specifications supports up to 14 overlapping
channels for radio communication. To minimize interference, configure each ASUS
WL-330N3G to be non-overlapping; select Auto from the Channel drop-down list
to enable the system to select a clear channel during boot up as your operating
channel.
Based on your site survey of your network facility, make sure that all the ASUS
WL-330N3G sharing the same channel, or channels in close number frequency,
are located far from each other as possible.
Authentication Method
This field enables you to set different authentication methods which determine
different encryption schemes. The relationships among Authentication Method,
WPA Encryption, WPA Pre-Shared Key, WEP Encryption, Passphrase, and WEP
Keys are listed in the following table. If all your clients support WPA, using “WPA-
PSK” is recommended for better security.
Authentication
Method
WPA/WEP
Encryption
WPA Pre-Shared
Key Passphrase
WEP Key 1-4
Open System
None
WEP (64 bits)
WEP (128 bits)
Not required
1-64 characters
1-64 characters
Not required
10 hex
26 hex
Shared key
WEP (64 bits)
WEP (128 bits)
1-64 characters
1-64 characters
10 hex
26 hex
WPA-Personal
TKIP+AES
8-63 characters
Not required
WPA2-Personal
TKIP+AES
8-63 characters
Not required
WPA-Auto-Personal
TKIP/AES/ TKIP+AES
8-63 characters
Not required
WPA Encryption
When
“WPA-Personal”, “WPA2-Personal”, or “WPA-Auto-Personal” authentication
method is used, TKIP (Temporal Key Integrity Protocol) and AES encryption
schemes are applied.
WPA Pre-Shared Key
Select “TKIP” or “AES” in the WPA Encryption, this field is used as a password to
begin the encryption process. 8 to 63 characters are required.
WEP Encryption
When “Open System”, or “Shared Key” authentication methods are selected,
traditional WEP encryption is applied.