Asus WS C246M PRO User Manual - Page 68
Power & Performance, Boot performance mode [Max Non-Turbo Performance]
View all Asus WS C246M PRO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Intel Trusted Execution Technology [Disabled] Allows you to enable or disable utilization of additional hardware capabilities provided by Intel(R) Trusted Execution Technology. Changes require a full power cycle to take effect. Configuration options: [Disabled] [Enabled] 3.4.2 Power & Performance Chapter 3 CPU - Power Management Control Boot performance mode [Max Non-Turbo Performance] This item allows you to select the performance state that the BIOS will set starting from reset vector. Configuration options: [Max Battery] [Max Non-Turbo Performance] [Turbo Performance] Intel(R) SpeedStep(tm) [Enabled] Allows more than two frequency ranges to be supported. Configuration options: [Disabled] [Enabled] Race To Halt (RTH) [Enabled] Allows you to enable or disable Race To Halt feature. RTH will dynamically increase CPU frequency in order to enter pkg C-State faster to reduce overall power. RTH is controlled through MSR 1FC bit 20. Configuration options: [Disabled] [Enabled] Intel(R) Speed Shift Technology [Disabled] Allows you to enable or disable Intel(R) Speed Shift Technology support. Enabling will expose the CPPC v2 interface to allow for hardware controlled P-states. Configuration options: [Disabled] [Enabled] HDC Control [Enabled] [Disabled] Disable HDC. [Enabled] Can be enable by OS if OS native support available. Turbo Mode [Enabled] Allows you to enable or disable processor turbo mode if EMTTM is also enabled. Configuration options: [Disabled] [Enabled] C-States [Enabled] Allows you to enable or disable CPU power management, this allows the CPU to enter C-state when not it is not 100 % utilized. Configuration options: [Disabled] [Enabled] 3-12 Chapter 3: BIOS Setup