Asus WS C246M PRO User Manual - Page 96
OS Wtd Timer Timeout [10 minutes], FRB-2 Timer Policy [Do Nothing]
View all Asus WS C246M PRO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
The following items appear only when BMC Support is set to [Enabled]. Wait for BMC [Disabled] Allows you to enable or disable wait for BMC response for specified time out. Configuration options: [Disabled] [Enabled] FRB-2 Timer [Enabled] Allows you to enable or disable FRB-2 timer (POST timer). Configuration options: [Disabled] [Enabled] FRB-2 Timer timeout [6 minutes] Allows you to select the FRB-2 Timer Expiration value. Configuration options: [3 minutes] [4 minutes] [5 minutes] [6 minutes] FRB-2 Timer Policy [Do Nothing] Allows you to select the how the system should respond in FRB-2 Timer expires. Configuration options: [Do Nothing] [Reset] [Power Down] [Power Cycle] OS Watchdog Timer [Disabled] This item allows you to start a BIOS timer which can only be shut off by Management Software after the OS loads. Configuration options: [Disabled] [Enabled] The following items are configurable only when OS Watchdog Timer is set to [Enabled]. OS Wtd Timer Timeout [10 minutes] Allows you to configure the length for the OS Boot Watchdog Timer. Configuration options: [5 minutes] [10 minutes] [15 minutes] [20 minutes] OS Wtd Timer Policy [Reset] This item allows you to configure the how the system should respond if the OS Boot Watch Timer expires. Configuration options: [Do Nothing] [Reset] [Power Down] [Power Cycle] Serial Mux [Disabled] Allows you to enable or disable Serial Mux configuration. Configuration options: [Disabled] [Enabled] BMC Warm Reset This item allow you to perform a BMC warm reset. Chapter 3 3-40 Chapter 3: BIOS Setup