Asus WS C621E SAGE User Manual - Page 78
CSM Configuration, 3.6.14 Intel(R) Virtual RAID on CPU, CSM Support
View all Asus WS C621E SAGE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
3.6.10 CSM Configuration This item allows you to configure the CSM (Compatibility Support Module) items to fully support the various VGA, bootable devices and add-on devices for better compatibility. CSM Support This option allows you to enable or disable CSM Support. Configuration options: [Disabled] [Enabled] The following items appear only when you set the CSM Support to [Enabled]. GateA20 Active This allows you to set the GA20 option. [Upon Request] GA20 can be disabled using BIOS services. [Always] Do not allow disabling GA20; this option is useful when any RT code is executed above 1MB. Option ROM Messages This allows you to set the display mode for option ROM. Configuration options: [Force BIOS] [Keep Current] INT19 Trap Response This option allows you to control the BIOS reaction on INT19 trapping by Option ROM. [Immediate] Execute the trap right away. [Legacy only] Execute the trap during legacy boot. Boot Option filter This option allows you to control the Legacy/UEFI ROMs priority. Configuration options: [UEFI and Legacy] [Legacy only] [UEFI only] Network / Storage / Video This option allows you to control the execution of UEFI and Legacy PXE/ Storage/ Video OpROM. Configuration options: [UEFI ] [Legacy] Other PCI devices This item determines the OpROM execution policy for devices other than Network, Storage, or Video. Configuration options: [UEFI ] [Legacy] 3.6.11 NVMe Configuration You may view the NVMe controller and Drive information if an NVMe device is connected. 3.6.12 USB Configuration The items in this menu allow you to change the USB-related features. 3.6.13 iSCSI Configuration Allows you to configure the iSCSi parameters. 3.6.14 Intel(R) Virtual RAID on CPU Allows you to configure the view the RAID volumes and VMD controllers on the system. Chapter 3 3-14 Chapter 3: BIOS Setup