Asus Z170-A User Guide - Page 36
Intel, Z170 Serial ATA 6.0 Gb/s connectors 7-pin SATA6G_12, SATA6G_34, SATA Express
View all Asus Z170-A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
2. Intel® Z170 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_12, SATA6G_34, SATA6G_56, SATA Express) These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables. If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® Z170 chipset. These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode]. Refer to section 2.6.5 PCH Storage Configuration for details. • The M.2 socket shares SATA ports with SATA Express. Only one SATA device could be activated. To use an M.2 SATA device, refer to section 2.6.8 Onboard Devices Configuration regarding the BIOS switch. • The SATAEXPRESS connector can support one SATA Express device or two SATA devices. 1-24 Chapter 1: Product Introduction