Asus Z170-WS Z170-WS User Guide for English - Page 100
Internal CPU Power Management, Fixed DRAM Switching Frequency KHz [300]
View all Asus Z170-WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
DRAM Switching Frequency [Auto] This item affects the VRM transient response speed and the component thermal production. Select [Manual] to configure a higher frequency for a quicker transient response speed. Configuration options: [Auto] [Manual] DO NOT remove the thermal module. The thermal conditions should be monitored. The following item appears only when you set the CPU VRM Switching Frequency to [Manual]. Fixed DRAM Switching Frequency (KHz) [300] This item allows you to set a higher frequency for a quicker transient response speed. Use the or to adjust the value. The values range from 300 KHz to 500 KHz with an interval of 50 KHz. Do not remove the thermal module when the manual mode is selected. The thermal conditions should be monitored. Boot Voltages CPU Core/Cache Boot Voltage [Auto] Configuration options: [Auto] [0.600] - [1.700] DMI Boot Voltage [Auto] Configuration options: [Auto] [0.300] - [1.900] Core PLL Boot Voltage [Auto] Configuration options: [Auto] [0.70000] - [2.40000] CPU System Agent Boot Voltage [Auto] Configuration options: [Auto] [0.7000] - [1.8000] CPU VCCIO Boot Voltage [Auto] Configuration options: [Auto] [0.7000] - [1.8000] Internal CPU Power Management The subitems in this menu allow you to set the CPU ratio and features. Intel(R) SpeedStep(tm) [Auto] Allows the operating system to dynamically adjust the processor voltage and cores frequency to decrease the average power consumption and decrease average heat production. Configuration options: [Auto] [Enabled] [Disabled] Turbo Mode [Enabled] Allows you to enable your processor cores to run faster than the base operating frequency when it is below power, current and specification limit. Configuration options: [Disabled] [Enabled] Chapter 3 3-26 Chapter 3: BIOS Setup