Asus Z170M-E D3 User Guide - Page 29
Z170M-E D3 Fan connectors, Z170M-E D3 Digital audio connector
View all Asus Z170M-E D3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
9. Digital audio connector (4-1 pin SPDIF_OUT) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis. +5V SPDIFOUT GND Z170M-E D3 PIN 1 SPDIF_OUT Z170M-E D3 Digital audio connector The S/PDIF module is purchased separately. 10. CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN 1/2) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector A CPU_FAN B CHA_FAN1 A B CPU FAN PWM CPU FAN IN CPU FAN PWR GND GND CHA FAN PWR CHA FAN IN CHA FAN PWM Z170M-E D3 C CHA_FAN2 C CHA FAN PWM CHA FAN IN CHA FAN PWR GND Z170M-E D3 Fan connectors Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! The CPU_FAN connector supports a CPU fan of maximum 1A (12 W) fan power. Only the 4-pin CPU fan supports the ASUS Fan Xpert 2+ feature. ASUS Z170M-E D3 1-19