Asus Z170M-E D3 User Guide - Page 67
Onboard Devices Configuration, Legacy USB Support [Enabled], XHCI Hand-off [Disabled]
View all Asus Z170M-E D3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
The USB Devices item shows the auto-detected values. If no USB device is detected, the item shows None. Legacy USB Support [Enabled] [Enabled] Your system supports the USB devices in legacy operating systems. [Disabled] Your USB devices can be used for BIOS setup only and cannot be recognized in the boot devices list. [Auto] Your system automatically detects the presence of USB devices at startup. If any USB devices are detected, the legacy USB support is enabled. XHCI Hand-off [Disabled] [Enabled] Enables the support for operating systems without an XHCI hand‑off feature. [Disabled] Disables the XHCI Hand-off support. USB Single Port Control The subitems in this menu allow you to set the USB Port Disable Override features. USB3_1/2/3/4/5/6/7/8, USB9/10/11/12/13/14 USB Port [Enabled] Allows you to enable or disable the USB ports individually. Configuration options: [Disabled] [Enabled] Refer to section 1.2.3 Motherboard layout for the location of the USB ports. 2.6.7 Onboard Devices Configuration HD Audio Controller [Enabled] [Enabled] Enables the HD Audio Device. [Disabled] Disables the HD Audio Device. The following two items appear only when you set the HD Audio Controller item to [Enabled]. Front Panel Type [HD Audio] Allows you to set the front panel audio connector (AAFP) mode to legacy AC'97 or high-definition audio depending on the audio standard that the front panel audio module supports. [HD Audio] Sets the front panel audio connector (AAFP) mode to high definition audio. [AC97] Sets the front panel audio connector (AAFP) mode to legacy AC'97 SPDIF Out Type [SPDIF] [SPDIF] [HDMI] Sets to an SPDIF audio output. Sets to an HDMI audio output. ASUS Z170M-E D3 2-33