Asus Z170M-E D3 User Guide - Page 68
APM Configuration, Charging USB devices in Power State S5 [Disabled]
View all Asus Z170M-E D3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Realtek LAN Controller [On] [On] Enables the Realtek LAN controller. [Off] Disables the controller. Realtek PXE Option ROM [Off] This item appears only when you set the previous item to [On] and allows you to enable or disable the PXE OptionRom of the Realtek LAN controller. Configuration options: [On] [Off] Charging USB devices in Power State S5 [Disabled] [Enabled] Charges USB devices even when the system is in Power State S5. State S5 is the soft-off mode or shutdown state where your computer has no memory state and is not doing any computing tasks. [Disabled] Disables this function. Serial Port Configuration The sub-items in this menu allow you to set the serial port configuration. Serial Port [On] Allows you to enable or disable the serial port (COM).Configuration options: [On] [Off] Change Settings [IO=3F8h; IRQ=4] This item appears only when you set the Serial Port to [On] and allows you to select the Serial Port base address. Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3] Parallel Port Configuration The sub-items in this menu allow you to set the parallel port configuration. Parallel Port [On] Allows you to enable or disable the parallel port (LPT/LPTE). Configuration options: [On] [Off] The following items appear only when you set the Parallel Port item to [On]. Change Settings [Auto] Allows you to select an optimal setting for Super I/O devices. Configuration options: [Auto] [IO=378h; IRQ=5;] [IO=378h; IRQ=5,6,7,9,10,11,12;] [IO=278h; IRQ=5,6,7,9,10,11,12;] [IO=3BCh; IRQ=5,6,7,9,10,11,12;] Device Mode [STD Printer Mode] Allows you to select the Printer Port mode. Configuration options: [STD Printer Mode] [SPP Mode] [EPP-1.9 and SPP Mode] [EPP-1.7 and SPP Mode] [ECP Mode] [ECP and EPP 1.9 Mode] [ECP and EPP 1.7 Mode] 2.6.8 APM Configuration ErP Ready [Disabled] Allows BIOS to switch off some power at S4/S5 to get the system ready for ErP requirement. When set to [Enable(S4+S5)] or [Enable(S5)], all other PME options will be switched off. Configuration options: [Enable(S4+S5)] [Enable(S5)] [Disabled] 2-34 Chapter 2: Getting started