Asus Z97-DELUXE/USB 3.1NFC&WLC User Guide - Page 123
USB Configuration, Legacy USB Support [Enabled], Intel xHCI Mode [Smart Auto]
View all Asus Z97-DELUXE/USB 3.1NFC&WLC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Memory Configuration This item allows you to configure the memory configuration parameters. Memory Scrambler [Enabled] Set this item to [Enabled] to support high frequency DRAMs for a better stability. Configuration options: [Enabled] [Disabled] Memory Remap [Enabled] Set this item to [Enabled] to support DRAM address remapping for 64-bit operating systems. Configuration options: [Enabled] [Disabled] 3.6.5 USB Configuration The items in this menu allow you to change the USB-related features. Chapter 3 The Mass Storage Devices item shows the auto-detected values. If no USB device is detected, the item shows None. Legacy USB Support [Enabled] [Enabled] Your system supports the USB devices in legacy operating systems. [Disabled] Your USB devices can be used for BIOS setup only and cannot be recognized in the boot devices list. [Auto] Your system automatically detects the presence of USB devices at startup. If any USB devices are detected, the legacy USB support is enabled. Intel xHCI Mode [Smart Auto] [Auto] The xHCI is automatically enabled and runs at USB 3.0 mode when the xHCI driver is installed in the operating system. [Smart Auto] Upon detection, the xHCI driver supports the USB 3.0 mode during both POST and operating system. [Enabled] Enables the xHCI controller. [Disabled] Disables the xHCI controller. ASUS Z97-DELUXE/USB 3.1 3-39