Asus Z9NR-D12 User Guide - Page 93
APM setting, APM setting
View all Asus Z9NR-D12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
4.4.11 APM setting Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced Restore AC Power Loss Power On By PCIE Power On By Ring Power On By RTC [Last State] [Disabled] [Disabled] [Disabled] Specify what state to go to when power is re-applied after a power failure (G3 state). Restore AC Power Loss [Last State] When set to [Power Off], the system goes into off state after an AC power loss. When set to [Power On], the system will reboot after an AC power loss. When set to [Last State], the system goes into either off or on state, whatever the system state was before the AC power loss. Configuration options: [Power Off] [Power On] [Last State] Power On By PCIE [Disabled] [Disabled] Disables the PCIE devices from generating a wake event. [Enabled] Enables the PCIE devices to generate a wake event. Power On By Ring [Disabled] [Disabled] Disables the Ring devices from generating a wake event. [Enabled] Enables the Ring devices to generate a wake event. Power On By RTC [Disabled] [Disabled] Disables RTC from generating a wake event. [Enabled] When set to [Eanbled], the items RTC Alarm Date (Days) and Hour/ Minute/Second will become user-configurable with set values. ASUS Z9NR-D12 4-29