Asus Z9PE-D8 WS User Guide - Page 50
LSI MegaRAID or Intel RSTe selection jumper 3-pin RAID_SEL1
View all Asus Z9PE-D8 WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
4. LSI MegaRAID or Intel RSTe selection jumper (3-pin RAID_SEL1) This jumper allows you to select the PCH SATA RAID mode to use LSI MegaRAID software or Intel® Rapid Storage Technology enterprise 3.0 RAID. Place the jumper caps over pins 1-2 if you want to use the LSI MegaRAID software RAID Utility (default); otherwise, place the jumper caps to pins 2-3 to use the Intel® Rapid Storage Technology Enterprise Option ROM Utility. 5. ME firmware force recovery setting (3-pin ME_RCVR1) This jumper allows you to force Intel Management Engine (ME) boot from recovery mode when ME become corrupted. 2-28 Chapter 2: Hardware information
2-28
Chapter 2: Hardware information
4.
LSI MegaRAID or Intel RSTe selection jumper (3-pin RAID_SEL1)
This jumper allows you to select the PCH SATA RAID mode to use LSI MegaRAID
software or Intel
®
Rapid Storage Technology enterprise 3.0 RAID. Place the
jumper caps over pins 1–2 if you want to use the LSI MegaRAID software RAID
Utility (default); otherwise, place the jumper caps to pins 2–3 to use the Intel
®
Rapid Storage Technology Enterprise Option ROM Utility.
5
.
ME firmware force recovery setting (3-pin ME_RCVR1)
This jumper allows you to force Intel Management Engine (ME) boot from
recovery mode when ME become corrupted.