Ativa 802.11g Wireless Cable/DSL Product Manual - Page 14
Power Jack, Connections to Computers Wired Computer Ports, Connection to Modem Modem Port
View all Ativa 802.11g Wireless Cable/DSL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Knowing your Router (6) (7) (8) (9) Reset button is located on the side of the unit. 6. Power Jack Connect the included 5V DC power supply to this jack. 7. Connections to Computers (Wired Computer Ports) Connect your wired (non-wireless) computers to these ports. These ports are RJ45, 10/100 auto-negotiation, auto-uplinking ports for standard UTP category 5 or 6 Ethernet cable. The ports are labeled 1 through 4. These ports correspond to the numbered LEDs on the front of the Router. 8. Connection to Modem (Modem Port) This port is for connection to your cable or DSL modem. Use the cable that was provided with the modem to connect the modem to this port. Use of a cable other than the cable supplied with the cable modem may not work properly. 12