Ativa 802.11g Wireless Cable/DSL Product Manual - Page 52
WEP Setup
![]() |
View all Ativa 802.11g Wireless Cable/DSL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Using the Web-Based Advanced User Interface WEP Setup 64-Bit WEP Encryption 1. Select "WEP" from the "Security" menu's "Allowed Client Type". 2. Select "64-bit" as the WEP mode. 3. After selecting your WEP encryption mode, you can enter your key by typing in the hex key manually, or you can put a check mark in "Passphrase", then type in your passphrase. Click "Apply Changes" to generate four different hex keys. A hex (hexadecimal) key is a combination of numbers and letters from A-F and 0-9. For 64-bit WEP, you must enter 10 hex keys. For instance: AF 0F 4B C3 D4 = 64-bit WEP key 4. Select the "Default Key ID" from the drop-down menu. WARNING: If you are configuring the Wireless G Router or access point from a computer with a wireless client, you must ensure that security is turned ON for this wireless client. If this is not done, your client will lose its wireless connection. 50
![](/manual_guide/products/ativa-80211g-wireless-cabledsl-product-manual-899aca8/52.png)