Audiovox AM/FM+ User Guide - Page 11

LF-30S Connecting and Using the IR Extender The IR extender allows you to remotely control the A/V device that is connected to the transmitter from the room you have the receiver located in. Connecting the IR Extender: 1. Extend the thin antenna upwards. 2. Plug in the IR extender into the connector on the back of the transmitter. 3. Extend the IR extender cable to the front of the A/V device that is connected to the transmitter. 4. Locate the IR window (dark, nearly opaque plastic) on the A/V device connected to the transmitter. Look into the window and try to locate the IR receiver behind the plastic. 5. Remove the adhesive pad on the IR extender and adhere it to the window in front of the IR receiver on the A/V device connected to the transmitter. 9 Transmitter RIGHT LEFT - + IR EXTENDER VIDEO IN AUDIO IN DC 15v IR window A/V device IR Extender Controlling the A/V device remotely with your remote control: Operate the A/V source's remote control (the A/V device that is connected to the transmitter) as you normally do while pointing it at the receiver. The receiver wirelessly sends the infrared command to the transmitter which then transmits it via the IR extender to the A/V source device. If you are having difficulty controlling the A/V device make sure that you verify that your IR extender is positioned correctly in front of the IR emitter on the device.