Audiovox AM/FM+ User Guide - Page 15

LF-30S Connecting the Receiver to Powered Computer Speakers Since the LF-30S only receives stereo audio signals and does not amplify them; the speakers you use to listen to wireless sound must be self-powered or attached to an amplifier or stereo receiver. 1. Make sure the receiver's On/Off Switch is "Off." 2. Connect the speaker input cable from your powered speakers to a "Y adapter" mini phone jack adapter (3.5mm to stereo RCA plug - not included). 3. Connect the red and white plugs of the "Y" adapter to the red and white audio jacks of the receiver. 4. Plug the small end of the power adapter into the back of the receiver and the other end into a standard A/C wall outlet. Turn the On/Off switch to the "On" position. 5. Make sure the receiver and transmitter units are set to the same channel. 6. Locate and orient the transmitter unit according to the "Orienting the Transmitter and Receiver Units" (page 14) section of this manual. Powered Speaker Powered Speaker 13 Receiver RIGHT LEFT - + TO TV VIDEO OUT AUDIO OUT DC 15v Mini Stereo Phono Jack-to-Stereo RCA Adapter (not included)