Audiovox AM/FM+ User Guide - Page 9

LF-30S Connecting the Transmitter to a Video Component Connecting the transmitter to a video component such as a DVD player, satellite receiver, VCR, PVR or camcorder. 1. Make sure the transmitter's On/Off switch is "Off." 2. Connect one set of red, white and yellow A/V cables from the A/V jacks on the back of the transmitter to the LINE OUT A/V jacks on the back of the A/V device. Be sure the red, white and yellow plugs on the A/V cables match the red, white and yellow jacks on both the transmitter and the A/V device. If the A/V device has only one output for audio (mono sound only); connect the white plugs on the cable to that single audio output and to the transmitter's AUDIO LEFT jack. 3. Plug the small end of the power adapter into the back of the transmitter and the other end into a standard A/C wall outlet. Turn the On/Off switch to the "On" position. 4. Make sure the receiver and transmitter units are set to the same channel. 5. Locate and orient the transmitter unit according to the "Orienting the Transmitter and Receiver Units" (page 14) section of this manual. Transmitter RIGHT LEFT - + IR EXTENDER VIDEO IN AUDIO IN DC 15v VIDEO LINE IN AUDIO LEFT RIGHT DVD, Sat, DVR 7