Audiovox APS95BT2 Programming Manual - Page 1

Model : APS 95 BT2 TRANSMITTER PROGRAMMING GUIDE The transmitters included in the security system kit are pre-programmed at the factory, with button # 1 assigned to channel one only. The suggested program arrangement is listed below. To program channels 2 and 3, please follow the programming instructions listed on pages two and three of this manual. Factory Settings for Transmitter Buttons Button # 1 Button # 2 Both Buttons 1 Remote Arm/Disarm Remote Emergency Panic Door Lock/Unlock (Optional) 2 Pulsed Output *(Optional Devices) 3 Switched Output * (Optional Devices) Used On: APS-40 APS-100,200,300 APS-150, 250, 350 & A's version APS-15KB/25KB 1/14/00 * Some of the more common accessories for these channels are; AS 9075 AS 9256 AS 9154 AS 9153 Remote Car Starter Remote Trunk Release Relay Remote Garage Door Interface Remote Window Roll Up 128 4624 1 12 Released English only. 7-25-95. Rev. A - Sht. 2-#7 was "one time"; sht. 3-#11 was "one time", #13 added "one short chirp". 8-15-95. Released French & Spanish. 10-31-95. Rev. B - Added ' note' to sheet 3 of 12, (for next printing). SUPERSEDED 128-4578. 7-10-96. Rev C: 3-30-00 - Remove AS-9151, Add AS-9075, Also Reference Correct Program Chirp Tones 15KB/25KB