Audiovox AW871 Operation Manual - Page 7

IV. Tuning the Speakers B A F C A. Tuning indicator light (tuned) B. Standby/Charging indicator light (stdby/chrg) C. Power/volume/scan control F. Left/mono/right switch 1. Push the power/volume/scan controls (C) to turn each speaker ON. The standby/charging indicators (B) will illuminate red while the speakers are tuning to the transmitter. The "tuned" indicators (A) will illuminate blue, indicating that the speakers are tuned to the transmitter, and you should hear sound coming from the speakers. Note: Once the speakers have tuned to the transmitter and the blue "tuned" indicators are on, the red "standby/charging" indicators will turn off. 2. Adjust volume on each speaker as desired. 3. For stereo operation, set the left/mono/right switch (F) to "left" on the speaker located to the left of the listener, and set the other speaker to "right" position. Set each speaker to "mono" for the best audio quality, if you plan on using one speaker in a different room from the other. 4. The speaker will automatically retune if it loses the signal from the transmitter. However, you can also push the power/volume/scan control to retune the speaker at any time. While the speaker is tuning, the blue "tuned" indicator will turn off and the red "standby/charging" light will be lit. After locking onto the transmitter signal, the blue "tuned" indicator will come back on and the red "standby/charging" indicator light will turn off. Note: Interference in the form of static and/or distortion can sometimes be heard. If this occurs, confirm the transmitter/speaker adjustments and indicators. If the problem persists, refer to the Troubleshooting section of this manual. 6