Audiovox DT102A Operation Manual - Page 10

Power Supply About the Rechargeable Battery Pack Battery charge indicator Red - Charging Green - Fully charged ON OFF Battery On/Off Switch Your portable DVD player comes with a lithium ion rechargable battery that attaches to the bottom of the player. Your new battery must be fully charged before initial use. Charging time is normally about 6 hours. A fully charged battery delivers about 2.5 hours of use, but playback time will vary depending on the playback settings and environmental conditions. If the battery will not be used for a long period of time, fully charge the battery prior to storage. Working conditions and precautions of the battery New batteries MUST be fully charged before initial use. Battery should only be used and charged when temperatures are between 32-80F. Never put the battery in fire or water. Do not expose the battery to high temperatures or store in hot, sunny places. Maintain well-ventilated conditions around the product, avoiding heat. Don't put the product on bed, sofa or anything that may block ventilation to the product. Do not disassemble the battery. When charging the battery pack, the charge indicator on the battery will light red, when the charging is complete the light will turn green. Detach the battery when not in use. The on/off switch on the battery must be the on position for use and charging. The off position Will prevent accidental battery discharge Battery Pack Attaching And Placement Refer to the following steps for attaching the Battery Pack: Place the DVD Player on a soft and smooth surface to avoid scratching the screen with its back cover facing UP. Position the Battery Pack directly toward the battery slot on the back cover of the DVD Player. Align the pins on the battery pack with the slots on the back of the DT102. Then slide the Battery Pack toward the back of the DVD Player until you hear it click and lock into place. Charging the Battery Pack The battery must be attached to the DVD player to charge it and the battery switch must be in the ON position. Plug the AC Power Adapter into the Player's DC-IN 9 V Jack, which is located on left side of the DT102. Plug the other end of the Power Cord into a wall Outlet. 10