Audiovox DT102A Operation Manual - Page 15

System Connections NOTE: Before plugging the power cord into an AC outlet, make sure that all the connections have been made as described below. Power Supply Connection Connect the AC power adapter to the side of the DVD player in the jack marked "DC 9V IN". Plug the twoprong end of the power cord to an AC100-240 outlet. If you have difficulty inserting the plug, turn it over and re-insert it. If the DVD Player will not be used for a long time, disconnect the plug from the outlet. Connecting To a TV (Refer Figure 1) Audio/Video connections Always ensure that the DVD player, TV and any other electrical equipment to be connected to the DVD player is switched OFF. Use the supplied Audio/Video adapter to connect the DVD player to a television or audio amplifier. Connect the audio/video adapter cable from the DVD player to the audio/video inputs of the TV. Switch the AV IN/OUT switch to OUT. Note: This requires an additional A/V cable not supplied. Connecting to an Amplifier (Refer Figure 2) The DVD player can also be connected to an audio amplifier. Please refer to the equipment's manual before connecting.Switch the AV IN/OUT switch to OUT. AUDIO IN/OUT VIDEO IN/OUT IN OUT AV AUDIO IN/OUT AV Switch turn to OUT VIDEO IN/OUT VIDEO IN AUDIO L AUDIO R Optional AUDIO L AUDIO R AMPLIFIER AUDIO IN/OUT VIDEO IN/OUT IN OUT AV AUDIO IN/OUT VIDEO IN/OUT AV Switch turn to OUT AV Adapter Cable AUDIO IN/OUT VIDEO IN/OUT IN OUT AV AUDIO IN/OUT VIDEO IN/OUT AV Switch turn to OUT Figure1 VIDEO IN AUDIO L AUDIO R Optional Figure2 15 AUDIO L AUDIO R AMPLIFIER Optional