Audiovox FPE2706 Operation Manual - Page 39

Other Information Troubleshooting If, after reading these operating instructions, you have additional questions related to the use of your television, please call the services center in your local area. Before calling service, please check the symptoms and follow suggested solutions. Remote Control Problem Remote control does not operate Remote control does not operate other brand equipment Possible Solutions ● The batteries could be weak. Replace the batteries. ● Check the orientation of the batteries. ● Make sure the power cord is plugged in. ● If you replaced the batteries to the remote recently, the code numbers for the video equipment may need to be reset. ● There may be more than one code for the equipment that you are attempting to operate. ● There is a possibility that this equipment can only be operated by its original remote control. Video and Audio Problem No picture (screen not lit), No sound Dark, poor or no picture (Screen lit), good sound No color/dark picture/color Is not correct Only snow and noise appear On the screen Dotted lines or stripes Double images "Black box" on screen Good picture, no sound Audio noise Possible Solutions ● Make sure the power cord is plugged in. ● Press POWER on the TV or on the remote control. ● Press the input source select button to cycle through the connected video sources. ● Try another channel; it could be station trouble. ● Select a proper picture mode. ● Adjust the brightness in the video setting. ● Check the antenna/cable connections. ● Adjust the color saturation in the video setting. ● Check the antenna/cable connections. ● Try another channel; it could be station trouble. ● Adjust the antenna. ● Move the TV away from noise sources such as cars, neon signs, or hair dryers. ● Using a highly directional outdoor antenna or a cable may solve the problem. ● You have selected a text option in the Setup setting and no text is available. Please try to turn off the Close Caption feature or select CC1 instead of Text1-4. ● The sound may be muted. Press MUTE again to cancel. ● Make sure the speaker option is set to On in theAudio settings. ● Make sure the stereo mode is set to stereo or mono. ● Communication problems may occur if infrared communication equipment (e.g., infrared cordless headphones) is used near the TV. Move the infrared communication equipment away from the TV until the noise is eliminated. 38