Audiovox FRS1000 Owners Manual - Page 19

Troubleshooting

Page 19 highlights

recommended that you do not use base and field units closer than 5 feet apart. 3. For best transmission results, always keep your mouth about 23 inches from the microphone (11) and speak slowly in a normal voice. Warning • Remove the batteries from the transceiver if it is not expected to be used for long periods. This will eliminate the possibility of chemicals leaking from the batteries and corroding the transceiver. • Avoid exposing the transceiver to water or extremes of temperature. • Do not use this device in or near a mining facility, which uses remotely triggered explosives or in areas labeled "Blasting Area". Premature or accidental detonation may result. • Do not attempt to modify or in any way increase the output of this transceiver. Its output is designed to meet the legal limits set by the FCC. • Do not use this device or change its batteries in potentially explosive atmospheres as sparks in such areas could result in an explosion. • Turn your transceiver off wherever posted notices restrict the use of radios or cellular telephones. Facilities such as hospitals may use equipment that is sensitive to RF energy. Troubleshooting Problem No transmission while pressing the PTT Button Possible cause Weak batteries Incorrect battery polarity 19 Correction Charge or replace batteries Install the batteries following the directions in paragraph Installing the Batteries.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

Warning
Remove the batteries from the transceiver if it is not expected to be used
for long periods.
This will eliminate the possibility of chemicals leaking
from the batteries and corroding the transceiver.
Avoid exposing the transceiver to water or extremes of temperature.
Do not use this device in or near a mining facility, which uses remotely
triggered explosives or in areas labeled “Blasting Area”.
Premature or
accidental detonation may result.
Do not attempt to modify or in any way increase the output of this
transceiver.
Its output is designed to meet the legal limits set by the FCC.
Do not use this device or change its batteries in potentially explosive
atmospheres as sparks in such areas could result in an explosion.
Turn your transceiver off
wherever posted notices restrict
the use of radios
or cellular telephones.
Facilities such as hospitals may use equipment
that is sensitive to RF energy.
19
recommended that you do not use base and field units closer than
5 feet apart.
3.
For best transmission results, always keep your mouth about 2-
3 inches from the microphone (11) and speak slowly in a normal
voice.
Troubleshooting
Problem
Possible cause
Correction
No transmission
Weak batteries
Charge or replace batteries
while pressing
Incorrect battery polarity
Install the batteries
the PTT Button
following the directions in
paragraph Installing the
Batteries.